220bloom Pharmaceutical Grade Gelatin Halal Powder CAS9000-70-8

Edible Gelatin Powder Product Description

Handling Directions

Recommendation for dispersion and solubilisation

A proper solubilisation of Anchi gelatines is critical for reaching the complete development of their functionalities. There are four main dissolution methods, allowing the preparation of up to 40% gelatin solution:

Conventional method:

Anchi gelatin is first swelled in cold water (30 minutes to 1 hour) and then dissolved by heating in a water bath

High speed method :

Anchi gelatin is directly dispersed in hot water (80-90°C) with appropriate high-speed stirring. Once dispersed, it will dissolve under slow agitation (5 to 10 minutes)

Intermediate method:

Anchi gelatin is swelled in cold water (30 minutes to 1 hour) and then dissolves by addition to hot ingredients

Dissolution of mixes:

For fine particle size, Anchi gelatin is mixed to other dry ingredient before dissolution

Preserve viscosity and gelatin characteristics

While gelatin is very stable in its gel form, various factors such as pH, temperature or bacterial environment may cause an hydrolysis of the protein chain yielding a decrease in viscosity and Bloom. It is thus very important to protect the solution against elevated temperature and at extreme pH for extended periods of time.

Cleaning Procedures:

Washing the equipment used for processing gelatin based products, is essential for maintaining good hygiene conditions and is easy to perform since gelatin is highly soluble in water.

For a batch process, the cleaning is done by washing, soaking or immersion of the equipment:

• Always start washing with very hot water, at least 80°C, to let swell and solubilize a maximum of residual gelatine
• Then the equipment is cleaned with a 2 to 5% soda solution, maintained at 60-80°C for 30 minutes for a total destruction of organic matters. (This treatment is possible only for stainless steel or glass)
• Finally, an acid treatment with an acid diluted bath (3 to 5‰) at 60 to 80°C will destroy mineral matters if any
• After each alkaline or acid bathes, the equipment is rinsed with hot water and the pH is measured ( to come back to neutrality)
• At last, if bacteriological problems occur, a disinfection of the equipment is possible, with a thermal treatment (steam or boiling water) or chemical treatment (ex sodium hypochlorite at 1 to 2% in concentration) followed by a rinsing step

Recommendations:

• The equipment has to be cleaned as much as possible and usually a daily cleaning is suited
• Cleaning and disinfection are suited after every accidental stop

Disinfection is unnecessary without a previous cleaning procedure

Edible Applications

Anchi Gelatin is the ideal natural ingredient that makes food a pleasure.

The right gelatin whatever the application

Lifestyles are changing significantly. Today, less time is spent on preparing meals, while people are still searching for a balanced diet and for new tastes.

The food industry must meet consumer expectations by creating new products which are quicker to prepare, easier to preserve, tastier, even more appetizing while following the well being trend of the market.

Main edible applications:

Confectionery

Dessert Jelly

Dairy products

Meat Industry

Clarification

Edible Gelatin Powder Powder data

Company Profile

FAQ

1. About us

Luohe Anchi Biotechnology Co., Ltd is located in the Luohe City, founded in 2019.. Mainly produces industrial, food, Gelatin. Products are widely used in food, beverage, feed industries.

2. how can we guarantee quality?

We have very strict process for Quality Check and have gone through different official QC and got the certificates;

3.what can you buy from us?

High Quality health supplements

4. Why US?

Our clients keep placing order to us because of our high quality products with the most competitive prices because only the win-win partnership can go a further way.

5. what services can we provide?

We offer Customization and very good after-sales service. We are always here to help you with all the questions that you may have.

Our services

1. 20+ years manufacturing experience.

2. OEM/ODM Service.

3. Sample service.

4. Direct factory,Competitive price.

5. Strict quality control system,professional QC team.

6. Quick response within 24 hours.